The rubber Two Roll Mill is mainly used for rubber production. In rubber production, the operating procedures of the rubber mixing mill must be known to the operator.
1. In addition to being familiar with the equipment performance and production process of the machine, the operator also needs to conduct professional mechanical training and pass professional examinations
2. The lubrication system of the rubber mixing mill needs to be kept unblocked. If the equipment is faulty, it must be repaired before starting up.
3. The cooling system of the rubber rubber two roll mill needs to meet the process requirements. During the startup process, the cooling system needs to operate normally.
4. The rubber two roll mill machine cannot work for a long time and needs a proper rest to ensure the normal operation of the machine.
5. Rubber that has been cold in winter or burnt rubber is not allowed to feed.
6. Do not put flammable and explosive materials into the open mill.
7. Once the side wall temperature exceeds 65℃, stop immediately.
8. The compressed air is not enough to drive, so as to avoid the upper and lower bolts from getting stuck.
9. When the rubber is found to be burnt, it should be unloaded immediately.
10. The lubricating oil of the oil cup of the oil pump should be the oil of the specified label, and can not be replaced by low-grade oil.
11. It is forbidden for personnel to stick their heads into the feeding port to observe and listen to the situation in the mixing room.
Familiar with the rubber Two Roll Mill machine operating procedures guide, it has a great guarantee for the safety of the operators, is also very useful for the maintenance of the machine, and can extend the life of the machine.