Categorys

Hydraulic Press Machine Equipment Manufacturer - XiHua

XH-406B
0.00
Description:
small hydraulic press machine is suitable for the compression molding of polymer materials such as raw materials of rubber,plastics,resins,pigments,ink,and chemical
< Prev: None Next > Vacuum Hydraulic Press Machine
Product Description

XH-406BE-30 hot pressing machine hot pressing machine/press machine/ good quality control  toolis applicable to R & D in laboratory.

Put the raw materials into the mold between the electric boards and set up certain pressure and temperature.The raw materials are formed into test specimen for test use.

The machine features compact size, cmplete functions, stable temperature, low noise, easy opention and material saving.

small hydraulic press machine is major in rubber and plastic machine, you can call it hot press molding machine, if you use the machine use for rubber you may call it vulcanizing press machine, because you know that the rubber material need to add sulfrizing and if you use for plastic, call it as hot press machine.

XH-406BE-30 Technical Parameter
Capacity selection
30 ton or customize
Temperature control
normal temperature~300℃
Precision of the control temp
+ -2℃
Heating Mode
Electrical Heating
Timepiece
LED 0~99(min)
Area of electric board
300*300mm designated
Area of cooling plate
300*300mm designated
Cooling mode
Compressor water cooling or running water cooling
Plate spacing
0~70mm designated
Volume
1100*650*1600mm
Weight
About 750kg
Power supply
3Ø, AC380V, 20A

Small Hydraulic Press Machine Features

(1) XH-406BE-30 tablet press machine is applicable to R & D in laboratory because of its compact size, complete functions, stable temperature, low noise, easy operation and material saving.
(2) High-precision temperature sensor, together LED temperature controller, built-in dense-point heating wire and tubular condenser, has the temperature range from normal temperature to 300℃.
(3) Imported KDB electric board features high-temperature resistance, abrasion resistance, fast thermal transmission and strenghthen against deformation.
(4) Single heating can be designed according to the requirements.
(5) Oil hydraulic system: the pressure range: 30 ton, the maximum stroke of the cylinder: 180mm.

Detailed Images

Machine Parts 

Name: Working plate


There are two working layers, the uper one is for heating, the lower one is for cooling

Machine Parts


Name: Control plate


Can be made into a PLC control system






Main Features


Name:Testing sheet for plastic


The small hydraulic press machine always used for making constract color sheet

Copyright OF DONGGUAN XIHUA TESTING MACHINE CO.,LTD. All rights reserved       admin